e2e test suite for Ingress NGINX Controller ¶
[Serial] admission controller ¶
- reject ingress with global-rate-limit annotations when memcached is not configured
- should not allow overlaps of host and paths without canary annotations
- should allow overlaps of host and paths with canary annotation
- should block ingress with invalid path
- should return an error if there is an error validating the ingress definition
- should return an error if there is an invalid value in some annotation
- should return an error if there is a forbidden value in some annotation
- should not return an error if the Ingress V1 definition is valid with Ingress Class
- should not return an error if the Ingress V1 definition is valid with IngressClass annotation
- should return an error if the Ingress V1 definition contains invalid annotations
- should not return an error for an invalid Ingress when it has unknown class
modsecurity owasp ¶
- should enable modsecurity
- should enable modsecurity with transaction ID and OWASP rules
- should disable modsecurity
- should enable modsecurity with snippet
- should enable modsecurity without using 'modsecurity on;'
- should disable modsecurity using 'modsecurity off;'
- should enable modsecurity with snippet and block requests
- should enable modsecurity globally and with modsecurity-snippet block requests
- should enable modsecurity when enable-owasp-modsecurity-crs is set to true
- should enable modsecurity through the config map
- should enable modsecurity through the config map but ignore snippet as disabled by admin
- should disable default modsecurity conf setting when modsecurity-snippet is specified
affinitymode ¶
server-alias ¶
- should return status code 200 for host 'foo' and 404 for 'bar'
- should return status code 200 for host 'foo' and 'bar'
- should return status code 200 for hosts defined in two ingresses, different path with one alias
app-root ¶
auth-tls-* ¶
- should set sslClientCertificate, sslVerifyClient and sslVerifyDepth with auth-tls-secret
- should set valid auth-tls-secret, sslVerify to off, and sslVerifyDepth to 2
- should 302 redirect to error page instead of 400 when auth-tls-error-page is set
- should pass URL-encoded certificate to upstream
- should validate auth-tls-verify-client
- should return 403 using auth-tls-match-cn with no matching CN from client
- should return 200 using auth-tls-match-cn with matching CN from client
- should return 200 using auth-tls-match-cn where atleast one of the regex options matches CN from client
backend-protocol ¶
- should set backend protocol to https:// and use proxy_pass
- should set backend protocol to $scheme:// and use proxy_pass
- should set backend protocol to grpc:// and use grpc_pass
- should set backend protocol to grpcs:// and use grpc_pass
- should set backend protocol to '' and use fastcgi_pass
- should set backend protocol to '' and use ajp_pass
canary-* ¶
- should response with a 200 status from the mainline upstream when requests are made to the mainline ingress
- should return 404 status for requests to the canary if no matching ingress is found
- should return the correct status codes when endpoints are unavailable
- should route requests to the correct upstream if mainline ingress is created before the canary ingress
- should route requests to the correct upstream if mainline ingress is created after the canary ingress
- should route requests to the correct upstream if the mainline ingress is modified
- should route requests to the correct upstream if the canary ingress is modified
- should route requests to the correct upstream
- should route requests to the correct upstream
- should route requests to the correct upstream
- should route requests to the correct upstream
- should routes to mainline upstream when the given Regex causes error
- should route requests to the correct upstream
- respects always and never values
- should route requests only to mainline if canary weight is 0
- should route requests only to canary if canary weight is 100
- should route requests only to canary if canary weight is equal to canary weight total
- should route requests split between mainline and canary if canary weight is 50
- should not use canary as a catch-all server
- should not use canary with domain as a server
- does not crash when canary ingress has multiple paths to the same non-matching backend
- always routes traffic to canary if first request was affinitized to canary (default behavior)
- always routes traffic to canary if first request was affinitized to canary (explicit sticky behavior)
- routes traffic to either mainline or canary backend (legacy behavior)
client-body-buffer-size ¶
- should set client_body_buffer_size to 1000
- should set client_body_buffer_size to 1K
- should set client_body_buffer_size to 1k
- should set client_body_buffer_size to 1m
- should set client_body_buffer_size to 1M
- should not set client_body_buffer_size to invalid 1b
connection-proxy-header ¶
cors-* ¶
- should enable cors
- should set cors methods to only allow POST, GET
- should set cors max-age
- should disable cors allow credentials
- should allow origin for cors
- should allow headers for cors
- should expose headers for cors
- should allow - single origin for multiple cors values
- should not allow - single origin for multiple cors values
- should allow correct origins - single origin for multiple cors values
- should not break functionality
- should not break functionality with extra domain
- should not match
- should allow - single origin with required port
- should not allow - single origin with port and origin without port
- should not allow - single origin without port and origin with required port
- should allow - matching origin with wildcard origin (2 subdomains)
- should not allow - unmatching origin with wildcard origin (2 subdomains)
- should allow - matching origin+port with wildcard origin
- should not allow - portless origin with wildcard origin
- should allow correct origins - missing subdomain + origin with wildcard origin and correct origin
- should allow - missing origins (should allow all origins)
custom-http-errors ¶
default-backend ¶
disable-access-log disable-http-access-log disable-stream-access-log ¶
- disable-access-log set access_log off
- disable-http-access-log set access_log off
- disable-stream-access-log set access_log off
backend-protocol - FastCGI ¶
- should use fastcgi_pass in the configuration file
- should add fastcgi_index in the configuration file
- should add fastcgi_param in the configuration file
- should return OK for service with backend protocol FastCGI
force-ssl-redirect ¶
from-to-www-redirect ¶
annotation-global-rate-limit ¶
backend-protocol - GRPC ¶
- should use grpc_pass in the configuration file
- should return OK for service with backend protocol GRPC
- authorization metadata should be overwritten by external auth response headers
- should return OK for service with backend protocol GRPCS
http2-push-preload ¶
influxdb-* ¶
whitelist-source-range ¶
Annotation - limit-connections ¶
limit-rate ¶
enable-access-log enable-rewrite-log ¶
mirror-* ¶
- should set mirror-target to http://localhost/mirror
- should set mirror-target to https://test.env.com/$request_uri
- should disable mirror-request-body
preserve-trailing-slash ¶
proxy-* ¶
- should set proxy_redirect to off
- should set proxy_redirect to default
- should set proxy_redirect to hello.com goodbye.com
- should set proxy client-max-body-size to 8m
- should not set proxy client-max-body-size to incorrect value
- should set valid proxy timeouts
- should not set invalid proxy timeouts
- should turn on proxy-buffering
- should turn off proxy-request-buffering
- should build proxy next upstream
- should setup proxy cookies
- should change the default proxy HTTP version
proxy-ssl-* ¶
- should set valid proxy-ssl-secret
- should set valid proxy-ssl-secret, proxy-ssl-verify to on, proxy-ssl-verify-depth to 2, and proxy-ssl-server-name to on
- should set valid proxy-ssl-secret, proxy-ssl-ciphers to HIGH:!AES
- should set valid proxy-ssl-secret, proxy-ssl-protocols
- proxy-ssl-location-only flag should change the nginx config server part
permanent-redirect permanent-redirect-code ¶
satisfy ¶
server-snippet ¶
- add valid directives to server via server snippet
- drops server snippet if disabled by the administrator
service-upstream ¶
- should use the Service Cluster IP and Port
- should use the Service Cluster IP and Port
- should not use the Service Cluster IP and Port
configuration-snippet ¶
ssl-ciphers ¶
stream-snippet ¶
- should add value of stream-snippet to nginx config
- should add stream-snippet and drop annotations per admin config
upstream-hash-by-* ¶
upstream-vhost ¶
x-forwarded-prefix ¶
- should set the X-Forwarded-Prefix to the annotation value
- should not add X-Forwarded-Prefix if the annotation value is empty
affinity session-cookie-name ¶
- should set sticky cookie SERVERID
- should change cookie name on ingress definition change
- should set the path to /something on the generated cookie
- does not set the path to / on the generated cookie if there's more than one rule referring to the same backend
- should set cookie with expires
- should set cookie with domain
- should not set cookie without domain annotation
- should work with use-regex annotation and session-cookie-path
- should warn user when use-regex is true and session-cookie-path is not set
- should not set affinity across all server locations when using separate ingresses
- should set sticky cookie without host
- should work with server-alias annotation
- should set secure in cookie with provided true annotation on http
- should not set secure in cookie with provided false annotation on http
- should set secure in cookie with provided false annotation on https
rewrite-target use-regex enable-rewrite-log ¶
- should write rewrite logs
- should use correct longest path match
- should use ~* location modifier if regex annotation is present
- should fail to use longest match for documented warning
- should allow for custom rewrite parameters
auth-* ¶
- should return status code 200 when no authentication is configured
- should return status code 503 when authentication is configured with an invalid secret
- should return status code 401 when authentication is configured but Authorization header is not configured
- should return status code 401 when authentication is configured and Authorization header is sent with invalid credentials
- should return status code 401 and cors headers when authentication and cors is configured but Authorization header is not configured
- should return status code 200 when authentication is configured and Authorization header is sent
- should return status code 200 when authentication is configured with a map and Authorization header is sent
- should return status code 401 when authentication is configured with invalid content and Authorization header is sent
- when external auth is configured
- when external auth is not configured
- when auth-headers are set
- should set cache_key when external auth cache is configured
- user retains cookie by default
- user does not retain cookie if upstream returns error status code
- user with annotated ingress retains cookie if upstream returns error status code
- should return status code 200 when signed in
- should redirect to signin url when not signed in
- keeps processing new ingresses even if one of the existing ingresses is misconfigured
- should overwrite Foo header with auth response
- should not create additional upstream block when auth-keepalive is not set
- should not create additional upstream block when host part of auth-url contains a variable
- should not create additional upstream block when auth-keepalive is negative
- should not create additional upstream block when auth-keepalive is set with HTTP/2
- should create additional upstream block when auth-keepalive is set with HTTP/1.x
- should return status code 200 when signed in
- should redirect to signin url when not signed in
- keeps processing new ingresses even if one of the existing ingresses is misconfigured
- should return status code 200 when signed in after auth backend is deleted
- should deny login for different location on same server
- should deny login for different servers
- should redirect to signin url when not signed in
- should return 503 (location was denied)
- should add error to the config
denylist-source-range ¶
- only deny explicitly denied IPs, allow all others
- only allow explicitly allowed IPs, deny all others
Debug CLI ¶
- should list the backend servers
- should get information for a specific backend server
- should produce valid JSON for /dbg general
[Default Backend] custom service ¶
[Default Backend] ¶
- should return 404 sending requests when only a default backend is running
- enables access logging for default backend
- disables access logging for default backend
[Default Backend] SSL ¶
[Default Backend] change default settings ¶
¶
¶
¶
¶
¶
[Setting] ¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
[Shutdown] Grace period shutdown ¶
[Shutdown] ingress controller ¶
- should shutdown in less than 60 secons without pending connections
- should shutdown after waiting 60 seconds for pending connections to be closed
- should shutdown after waiting 150 seconds for pending connections to be closed
[Shutdown] Graceful shutdown with pending request ¶
[Ingress] DeepInspection ¶
single ingress - multiple hosts ¶
[Ingress] [PathType] exact ¶
[Ingress] [PathType] mix Exact and Prefix paths ¶
[Ingress] [PathType] prefix checks ¶
[Ingress] definition without host ¶
- should set ingress details variables for ingresses without a host
- should set ingress details variables for ingresses with host without IngressRuleValue, only Backend
[Memory Leak] Dynamic Certificates ¶
[Load Balancer] load-balance ¶
[Load Balancer] EWMA ¶
[Load Balancer] round-robin ¶
[Lua] dynamic certificates ¶
- picks up the certificate when we add TLS spec to existing ingress
- picks up the previously missing secret for a given ingress without reloading
- supports requests with domain with trailing dot
- picks up the updated certificate without reloading
- falls back to using default certificate when secret gets deleted without reloading
- picks up a non-certificate only change
- removes HTTPS configuration when we delete TLS spec
[Lua] dynamic configuration ¶
- configures balancer Lua middleware correctly
- handles endpoints only changes
- handles endpoints only changes (down scaling of replicas)
- handles endpoints only changes consistently (down scaling of replicas vs. empty service)
- handles an annotation change
[Security] request smuggling ¶
[Service] backend status code 503 ¶
- should return 503 when backend service does not exist
- should return 503 when all backend service endpoints are unavailable
[Service] Type ExternalName ¶
- works with external name set to incomplete fqdn
- should return 200 for service type=ExternalName without a port defined
- should return 200 for service type=ExternalName with a port defined
- should return status 502 for service type=ExternalName with an invalid host
- should return 200 for service type=ExternalName using a port name
- should return 200 for service type=ExternalName using FQDN with trailing dot
- should update the external name after a service update
- should sync ingress on external name service addition/deletion
[Service] Nil Service Backend ¶
[Security] modsecurity-snippet ¶
OCSP ¶
access-log ¶
- use the default configuration
- use the specified configuration
- use the specified configuration
- use the specified configuration
- use the specified configuration
Bad annotation values ¶
- [BAD_ANNOTATIONS] should drop an ingress if there is an invalid character in some annotation
- [BAD_ANNOTATIONS] should drop an ingress if there is a forbidden word in some annotation
- [BAD_ANNOTATIONS] should allow an ingress if there is a default blocklist config in place
- [BAD_ANNOTATIONS] should drop an ingress if there is a custom blocklist config in place and allow others to pass
brotli ¶
Configmap change ¶
add-headers ¶
[SSL] [Flag] default-ssl-certificate ¶
- uses default ssl certificate for catch-all ingress
- uses default ssl certificate for host based ingress when configured certificate does not match host
[Flag] disable-catch-all ¶
- should ignore catch all Ingress with backend
- should ignore catch all Ingress with backend and rules
- should delete Ingress updated to catch-all
- should allow Ingress with rules
[Flag] disable-service-external-name ¶
enable-real-ip ¶
- trusts X-Forwarded-For header only when setting is true
- should not trust X-Forwarded-For header when setting is false
use-forwarded-headers ¶
- should trust X-Forwarded headers when setting is true
- should not trust X-Forwarded headers when setting is false
Geoip2 ¶
- should include geoip2 line in config when enabled and db file exists
- should only allow requests from specific countries
[Security] block-* ¶
- should block CIDRs defined in the ConfigMap
- should block User-Agents defined in the ConfigMap
- should block Referers defined in the ConfigMap
[Security] global-auth-url ¶
- should return status code 401 when request any protected service
- should return status code 200 when request whitelisted (via no-auth-locations) service and 401 when request protected service
- should return status code 200 when request whitelisted (via ingress annotation) service and 401 when request protected service
- should still return status code 200 after auth backend is deleted using cache
- should proxy_method method when global-auth-method is configured
- should add custom error page when global-auth-signin url is configured
- should add auth headers when global-auth-response-headers is configured
- should set request-redirect when global-auth-request-redirect is configured
- should set snippet when global external auth is configured
- user retains cookie by default
- user does not retain cookie if upstream returns error status code
- user with global-auth-always-set-cookie key in configmap retains cookie if upstream returns error status code
global-options ¶
- should have worker_rlimit_nofile option
- should have worker_rlimit_nofile option and be independent on amount of worker processes
settings-global-rate-limit ¶
hash size ¶
- should set server_names_hash_bucket_size
- should set server_names_hash_max_size
- should set proxy-headers-hash-bucket-size
- should set proxy-headers-hash-max-size
- should set variables-hash-bucket-size
- should set variables-hash-max-size
- should set vmap-hash-bucket-size
[Flag] ingress-class ¶
- should ignore Ingress with a different class annotation
- should ignore Ingress with different controller class
- should accept both Ingresses with default IngressClassName and IngressClass annotation
- should ignore Ingress without IngressClass configuration
- should delete Ingress when class is removed
- should serve Ingress when class is added
- should serve Ingress when class is updated between annotation and ingressClassName
- should ignore Ingress with no class and accept the correctly configured Ingresses
- should watch Ingress with no class and ignore ingress with a different class
- should watch Ingress that uses the class name even if spec is different
- should watch Ingress with correct annotation
- should ignore Ingress with only IngressClassName
keep-alive keep-alive-requests ¶
- should set keepalive_timeout
- should set keepalive_requests
- should set keepalive connection to upstream server
- should set keep alive connection timeout to upstream server
- should set keepalive time to upstream server
- should set the request count to upstream server through one keep alive connection
Configmap - limit-rate ¶
[Flag] custom HTTP and HTTPS ports ¶
- should set X-Forwarded-Port headers accordingly when listening on a non-default HTTP port
- should set X-Forwarded-Port header to 443
- should set the X-Forwarded-Port header to 443
log-format-* ¶
- should not configure log-format escape by default
- should enable the log-format-escape-json
- should disable the log-format-escape-json
- should enable the log-format-escape-none
- should disable the log-format-escape-none
- log-format-escape-json enabled
- log-format default escape
- log-format-escape-none enabled
[Lua] lua-shared-dicts ¶
main-snippet ¶
enable-multi-accept ¶
- should be enabled by default
- should be enabled when set to true
- should be disabled when set to false
[Flag] watch namespace selector ¶
[Security] no-auth-locations ¶
- should return status code 401 when accessing '/' unauthentication
- should return status code 200 when accessing '/' authentication
- should return status code 200 when accessing '/noauth' unauthenticated
Add no tls redirect locations ¶
Configure OpenTracing ¶
- should not exists opentracing directive
- should exists opentracing directive when is enabled
- should include opentracing_trust_incoming_span off directive when disabled
- should not exists opentracing_operation_name directive when is empty
- should exists opentracing_operation_name directive when is configured
- should not exists opentracing_location_operation_name directive when is empty
- should exists opentracing_location_operation_name directive when is configured
- should enable opentracing using zipkin
- should enable opentracing using jaeger
- should enable opentracing using jaeger with sampler host
- should propagate the w3c header when configured with jaeger
- should enable opentracing using jaeger with an HTTP endpoint
- should enable opentracing using datadog
plugins ¶
[Security] Pod Security Policies ¶
[Security] Pod Security Policies with volumes ¶
proxy-connect-timeout ¶
- should set valid proxy timeouts using configmap values
- should not set invalid proxy timeouts using configmap values
Dynamic $proxy_host ¶
proxy-next-upstream ¶
use-proxy-protocol ¶
- should respect port passed by the PROXY Protocol
- should respect proto passed by the PROXY Protocol server port
- should enable PROXY Protocol for HTTPS
- should enable PROXY Protocol for TCP
proxy-read-timeout ¶
- should set valid proxy read timeouts using configmap values
- should not set invalid proxy read timeouts using configmap values
proxy-send-timeout ¶
- should set valid proxy send timeouts using configmap values
- should not set invalid proxy send timeouts using configmap values
reuse-port ¶
configmap server-snippet ¶
- should add value of server-snippet setting to all ingress config
- should add global server-snippet and drop annotations per admin config
server-tokens ¶
- should not exists Server header in the response
- should exists Server header in the response when is enabled
ssl-ciphers ¶
configmap stream-snippet ¶
[SSL] TLS protocols, ciphers and headers) ¶
- setting cipher suite
- setting max-age parameter
- setting includeSubDomains parameter
- setting preload parameter
- overriding what's set from the upstream
- should not use ports during the HTTP to HTTPS redirection
- should not use ports or X-Forwarded-Host during the HTTP to HTTPS redirection
[Flag] disable-sync-events ¶
gzip ¶
- should be disabled by default
- should be enabled with default settings
- should set gzip_comp_level to 4
- should set gzip_disable to msie6
- should set gzip_min_length to 100
- should set gzip_types to application/javascript
With enable-ssl-passthrough enabled ¶
- should enable ssl-passthrough-proxy-port on a different port
- should pass unknown traffic to default backend and handle known traffic
[SSL] redirect to HTTPS ¶
[SSL] secret update ¶
- should not appear references to secret updates not used in ingress rules
- should return the fake SSL certificate if the secret is invalid